Concrete Coatings and Torginol FLAKE

We’re your Western Canada supplier for concrete coatings; epoxy, polyurethane and polyaspartic, water-based, urethane, moisture control and vapour reduction, decorative flakes plus much more!

     

At DFM West Distribution we supply professional installers, distributors and retail dealers.  Our products are used across the country for commercial, industrial, and residential projects.  We stock two Canadian manufactured products, CTM Coatings and MPC Coatings.
 
CTM Coatings, a SIKA company, has been manufacturing construction chemicals since 2011. Their mission is to offer top-quality products with excellent service and technical support. Particularly, their epoxy and polyurethane are approved with the Canadian Food Inspection Agency.
 
Similarly, MPC Coatings manufactures a wide variety of polymer floor coatings. Their products have undergone extensive development and quality control testing to offer the best possible product on the market.

Concrete Floor Coatings

100% Solids Epoxy

100% solids epoxy describes a type of industrial coating that has no solvents that will evaporate into the air when you apply it. This means that one hundred percent of the product will stay on the floor. It is a two component self-leveling coating in a monochrome colour with an opaque and glossy finish.  The system is seamless, has high covering power, and can be used to restore deteriorated floors or protect new floors.

Polyaspartic Polyurea

A two-component, 83% solids, VOC compliant, low odor, aliphatic polyaspartic polyurea that was developed for UV stable floor topcoats. It provides outstanding appearance, superior chemical, UV, and solvent resistance, and exhibits excellent physical properties. Can be used for marine protection for fiberglass, steel, concrete or wood, maintenance facilities, offshore platforms, industrial shop floors, car washes or wash bays, bridges, wastewater treatment applications. Fast cure time and non-yellowing.

Water-Based Urethane

A two-component waterborne polyurethane coating system. It is designed according to specific properties required for concrete floors and walls and provides outstanding appearance and a hard finish highly resistant to abrasion. Can be used as a primer or topcoat on concrete, wood and other materials. Available clear in a satin or gloss finish and often used for interior coatings for pharmaceutical installations and food processing plants.
 

Polyurethane Coating

A two-component, 90% solids, VOC compliant, polyurethane coating developed as a topcoat. The product contains a UV protector and provides a glossy finish with superior chemical resistance. It exhibits excellent physical properties and can be used for marine protection for fiberglass, steel, concrete or wood, maintenance facilities, offshore platforms, industrial shop floors, car washes or wash bays, bridges, wastewater treatment applications.
 

Vapour Reduction Membrane

Vapor reduction membranes are a 100% solid, two-component epoxy coating. They control the moisture vapor emission rate on deteriorated or new floors. As well, they meet ASTM F3010 product requirements for vapor permeance (when applied at a thickness of 18 mils). As a result, the coating will control moisture vapor emission rates up to 25 lb. /24 hr /1000 square feet. 
 

Epoxy Crack Filler

We will be your supplier for all epoxy crack filler – available in regular speed, fast or super-fast cure times.  Epoxy crack filler is a two-component, sag resistant structural epoxy designed to repair cracks. It bonds well to concrete, masonry, wood, metal and plastics. This product contains no solvent, is complaint with the CFIA regulations for indirect food contact, and meets the VOC regulations limit of under 100 g/L for architectural floor coatings.
 
We also supply one-day garage floor kits, traffic deck membrane systems, textured coatings, and standard and metallic colour tints!
Urethane Automotive Shop Floor
Grey/Black Metallic Epoxy Floor
Solid White Airport Hanger

Please see our resources page for complete product info and data sheets or contact us to locate your nearest dealer!

Decorative Finishes

FLAKE | Polymer ColorFlakes

We’re the largest Western Canada distributor of Torginol FLAKE. In fact, our warehouse shelves 15 colour blends of the most popular selections. Fully compatible with specialty coating systems, flakes are truly an excellent way to add durability and anti-slip while creating a unique, attractive, and easy to clean finish. Try and be creative with decorative flakes by adding random amounts of solid colours to blends to make your room extremely one of a kind!

(Blends available in 40 lb. boxes, solid colours special order)

Orbit
Orbit
Domino
Domino
Shoreline
Shoreline
Stonehenge
Stonehenge
Outback
Outback
Madras
Madras
Nightfall
Nightfall
Creekbed
Creekbed
Wombat
Wombat
Bean
Bean
Cabin Fever
Cabin Fever
Basalt Stone
Basalt Stone
Gunflint Trail
Gunflint Trail
Quicksilver
Quicksilver
Raven
Raven
Solid Colours
Solid Colours
Partial Flake Over Grey Floor
Bean Flake Epoxy Garage Floor
Polyaspartic Flake Garage Floor

QUARTZ | Quartz ColorGranules

Torginol Quartz granules are an almost sparkling decorative finish that can be applied in multiple ways. They create different textures and levels of slip resistance. Quartz flooring systems see their largest popularity in pools, outdoor patios, food production facilities, labs and bathroom facilities.

Quartz ColourGranules sizes:

  • 40S Broadcast Grade
  • 25A Trowel Grade

*Special order only.

quartzcolorpalette
Floor Coatings & FLAKE

MICA | Natural MicaFlakes

These super neat metallic flakes come from sheet silicate minerals known as mica. Through manufacturing, the shape of the mica is separated into sheet-like pieces and broken down. In other words, they provide a natural shiny finish to flooring systems with a flake decorative pattern. This cannot be achieved with any other engineered material!

*Special order only.

micasignatureblends
Floor Coatings & FLAKE